How to install a VPN?

Modified on Sat, 11 May at 3:36 PM

Step 1: Download and install the AmneziaVPN app on your device
Step 2: Launch the AmnesiaVPN app

Select "I have connection information."

Step 3: Select the data type you have.

Select "Set up your server."

Step 4: Add connection information

On this app screen you will be asked to enter your connection details:

IP: ip - your server address

Password: ***************

If you changed the port, specify it with a colon after the IP.

Step 5: Choose a preset profile or set up your own VPN

At this point, you can choose a predefined profile that suits your needs, or customize your settings by selecting a VPN protocol from the list below:

OpenVPN, WireGuard, and IKEv2 are VPN protocols that add traffic encryption and provide secure access to websites.

ShadowSocks is a protocol that bypasses all Internet traffic as HTTPS traffic.

AmneziaWG is a fork of the WireGuard-GO protocol with traffic protection. It provides the perfect balance between concealment and speed.

OpenVPN over Cloak is OpenVPN with additional Cloak traffic masking. It disguises VPN traffic as HTTPS traffic. Recommended for maximum protection, but may reduce performance.

Xray VPN is a virtual private network (VPN) service that provides the user with the ability to secure and anonymously connect to the Internet. A VPN encrypts your Internet connection and routes it through a remote server, which provides protection from ISP snooping and also protects your personal information from hackers and cyberattacks

Wait while Amnezia configures your VPN.

Click on the “Connect” button.

Now you can share your connection with other people, add and remove protocols, choose the sites you want or don't want to use a VPN for, configure your own DNS and much more...